How to Clean Your Coconut Lane Phone Case Properly 🫧
To clean your case safely, remove it from your phone, wash it with warm water and mild soap, gently clean it with a soft cloth or toothbrush, then dry it fully before putting it back on your device. Avoid harsh chemicals or abrasive tools, especially on printed, glossy or clear cases 🧼
Giving your phone case a clean isn’t just about the aesthetic - it helps maintain hygiene and prolong the life of your case 🤭
Step by step guide: to keep your case sparkling ✨
- Remove the case from your phone
- Gently rinse with warm water to loosen any dirt
- Apply a small amount of mild soap (like hand soap or washing-up liquid)
- Gently scrub the case using a soft cloth, sponge, or a soft toothbrush
- Rinse thoroughly to remove all soap residue
- Pat dry with a clean towel
- Air dry completely before putting it back on your phone
Rinse with warm water 💦
apply soap 🧼
scrub then rinse 🧽
How to clean a Silicone Phone Case 📱
If you're wondering how to clean a Silicone Phone Case, the main difference is how you handle stains and texture.
What’s different for silicone:
- Silicone can attract lint and oils more easily
- It’s slightly more durable when it comes to gentle scrubbing
For tougher marks:
- Use a baking soda paste. Mix 2 parts baking soda to 1 part water to create a thick, spreadable paste (it should feel like toothpaste, not runny)
- Apply lightly to the stained area with a soft toothbrush or your fingers
- Leave for 10–15 minutes maximum
- Gently scrub with a soft toothbrush, then rinse thoroughly
How to clean a Clear Phone Case 💫
If you're wondering how to clean Clear Phone Cases, it's pretty similar to the above, but the key here is preventing scratches and managing discolouration.
What’s different for clear cases:
- More prone to fine scratches
- More sensitive to abrasive cleaning
- Discolouration (yellowing) is more visible and more common over time
Best approach:
- Follow the standard cleaning method
- Use a microfibre cloth for a streak-free finish (as opposed to a harsher sponge or toothbrush)
- Only use baking soda sparingly and avoid heavy scrubbing
Why do Clear Phone Cases turn yellow? 💛
If you’ve noticed discolouration, you’re not alone. Many people ask, why do clear phone cases turn yellow?
The main reasons:
- UV exposure (sunlight)
- Natural oils from your hands
- Heat and environmental factors
- Material ageing (especially TPU plastic)
Unfortunately, once a clear case turns yellow, it can’t be fully restored, and you'll need to purchase a new one. Cleaning may improve surface marks, but you’ll likely need to replace it to get that crystal-clear look back.
What should you not use to clean a Phone Case? ❌
Knowing what not to use is just as important as knowing what works.
Avoid these:
- Bleach
- Alcohol-based cleaners (on printed cases)
- Harsh chemical sprays
- Abrasive sponges or scouring pads
- Rubbing too hard
- Skip strong solvents
💡 Tip: Always be gentle - especially with printed or glossy finishes - to avoid scratches or fading.
How often should you clean your Phone Case? 🤔
Your phone goes everywhere with you - so your case picks up more dirt than you think.
Recommended cleaning frequency:
- Light clean: once a week
- Deep clean: every 2 - 4 weeks
- More often if: you use your phone during workouts, travel frequently, or notice visible dirt
FAQs
Use a soft cloth (like microfibre) and avoid abrasive materials. Clean gently and avoid over-scrubbing.
Use a mild soap clean first, then a small amount of baking soda paste for stubborn marks. Leave it on for no more than 10–15 minutes before rinsing.
It’s best to avoid alcohol, especially on printed or coated cases, as it can cause fading or damage to the finish.
Stick to warm water, mild soap, and soft cleaning tools. Avoid harsh chemicals and always dry the case fully before putting it back on your phone.